2.5 SSD SATA to 3.5 Hard Drive Adapter Internal Bay Converter Mounting Bracket C

Description

【2.5 to 3.5 Drive Adapter】- ORICO ssd adapter can easily convert 2.5-inch SATA drives to 3.5-inch size. Compatible with any 7 / 9.5 / 12.5mm 2.5-inch hard drives.
【Convenient Use】 - The ssd caddy itself has a SATA III interface, which does not require data cables and drivers, supports hot swapping, plug and play. Compatible with Windows, Mac OS and Linux.
【6Gbps SuperSpeed】 - Adopting SATA 3.0 protocol, the maximum transmission rate of this 2.5 to 3.5 ssd converter is up to 6Gbps, which enables high-speed transfer of HD movies and data. Backward compatible with SATA I/II.
【Air Flow Design】 - The hard drive tray is made of ABS plastic, has multiple slots on both sides, and features an open design that allows for air flowing to maximize protecting your hard drive.
【Wide Application 】- It can be used anywhere 3.5-inch drives are commonly used, including desktop computer drive bays and side or bottom mount drive enclosure trays.
Product Description
Do you have 2.5" hard drives that you cannot install into your desktop PC?
If so, the ORICO 2.5" to 3.5" Hard Drive Adapter is perfect for you. It turns your 2.5-inch HDD or SSD into a 3.5-inch size.
State-of-the-art Craftsmanship Brings Superb Quality
Made of fireproof, shockproof ABS material.
Delicate, cutting-edge craftsmanship makes it perfectly fit for 3.5" bays.
Renew Old Hard Drives
Put old 2.5 inch hard drive into this hard drive caddy to be a 3.5 inch hard drive; connect computer case to renew your old hard drives.
Reuse your old drives and expand your PC capacity
Supports all 7mm / 9.5mm / 12.5mm 2.5" SATA hard drives, including HDD and SSD. Supports Serial ATA I / II / III.
Full Air Flow
The side slots and open design allows for full air flow for proper drive cooling, protecting your hard drive from over-heating.
Maximized Speed of SATA 3.0
Built with SATA III standard, providing a maximum data transfer speed of 6Gbps. Backward compatible with SATA 1.0 / 2.0.
Plug-and-Play Design
Supports hot-swapping, no driver needed (*motherboard support required).
Perfect Combination
1125SS turn the 2.5 inch ssd/hard disk to 3.5 inch and then use it with multi-disk hard disk enclosure will be perfect.
Kindly Notes:
Make sure the disk is out of running before cutting off the power or unpluging the cable;
The actual transfer speed depends on the operating environment, PC conditions and hard drive;
Make sure your computer supports UASP, supported UASP systems: WIN8 / WIN10 / MAC OS 8 & 9 or higher.
Frequently Asked Questions：
Q: The device does not recognized by my computer?
A:
Go to Disk Management, right-click the "Unallocated" or "Free space" to assign a drive letter for the disk.
Q: HDD stops working Constantly? Need to unplug and plug back in several minutes?
A:
Make sure you press the drive in as far as it goes. Or try another cables.
Color
Black
Black
Sliver
Black
Black
Black
Max SSD/HDD
2 Bay
4 Bay
5 Bay
5 Bay
5 Bay
8 Bay
Interface
USB3.0 Type-B
USB3.0 Type-B
USB3.0 Type-B
USB3.0 Type-B
USB3.0 Type-C
USB3.0 Type-B
Transfer Rate
5Gbps
5Gbps
5Gbps
5Gbps
6Gbps
5Gbps
Max Capacity
2x16TB
4x16TB
5x16TB
5x16TB
5x16TB
8x16TB
Power Supply
32W External
150W Internal
78W External
150W Internal
78W External
120W External
Raid Mode
No Raid
No Raid
0/1/5/10/JBOD/ClONE/Normal RAID Mode
0/1/5/10/JBOD/ClONE/Normal RAID Mode
0/1/5/10/JBOD/ClONE/Normal RAID Mode
No Raid
Install Mode
Push-pull
Push-pull
Screwing
Push-pull
Magnetic
Magnetic
Product Size
234mm(L)*135mm(W)*93.7mm(H)
264.8mm(L) * 135mm(W) * 166.7mm(H)
242mm(L) * 165mm(W) * 139mm(H)
265mm(L) * 137mm(W) * 201mm(H)
223mm(L) * 159mm(W) * 134mm(H)
248mm(L) * 225mm(W) * 140mm(H)